UltraTech TILEFIXO is a polymer modified cement based high performance, high strength, high quality tile adhesive developed to fix tiles, Natural Stones over walls and floors. Suitable for both internal and external, thin bed applications. There are four variant of TILEFIXO for different application.
Superior general purpose Cementitious Tile Adhesives recommended for mass flooring requirements on concrete substrate and small to medium size vertical application.
Premium Polymer modified Tile Adhesives for large format range of Vitrified and Porcelain Tiles for floor and wall application over concrete substrate and application for Tile on tile over substrate like Ceramic, Vitrified, Mosaic and Natural stone
Specially designed Tile Adhesive for large size natural stone like varieties of Granite and other stones for vertical and horizontal application over concrete and plastered surface for vertical application
Premium White cement based Polymer modified Cementitious Tile Adhesives for Italian and Indian Marble stone for substrate on concrete and over stone flooring
Polymer enriched high strength Repair Mortar and Micro Concrete for repair application on de stressed Columns, Beams and highly porous roof requiring repair and strengthening of structure.
UltraTech MICROKRETE is a polymer enriched cement based high performance, high strength, non-shrink high quality micro concrete for micro concreting and jacketing applications of columns, beams, and concrete slab repairs. Ideal for fast and durable repairs. It is developed by using special polymers, additives and selected fillers. Addition of coarse aggregates of up to 8 mm size is possible for higher volume applications. There are three variant of MICROKRETE.
MICROKRETE – HS1: For designed strength of 80 MPa
MICROKRETE - HS2 : For designed strength of 60 MPa
MICROKRETE - HS3 : For designed strength of 40 MPa
UltraTech BASEKRETE is a polymer modified cement based High performance pre-mixed high strength mortar specially formulated for multipurpose applications. Suitable for application in brick/block laying, for thicker plasters for external and internal areas which demand high strength. It can also be used as a polymer modified repair mortar for old surface repairs. Ideal for plastering inside swimming pools, water tanks, foundation areas and basements. It can also be used as an underlayment plaster for tile adhesives to provide the required strength of plaster underneath the Tile adhesive to hold the special/large size tiles over vertical surfaces.
Multipurpose Floor Screeds for varieties of application as underlayment for floor tiles application for indoor and outdoor locations. Strongly recommended over waterproof agents applied as single and two component over concrete roof for higher thickness requiring slopes for draining out rain water eliminating the usage of brick bat coba application.
UltraTech FLOORKRETE is a polymer modified cement based High performance pre-mixed high strength mortar specially formulated for multipurpose floor screed applications. It is suitable in terrace areas for final levelling screed over water proofing coatings, floors in residential buildings, office buildings, commercial projects, public buildings and as underlayment for tile adhesives and epoxy/PU and special flooring systems.
Floorkrete has three variants.
Floorkrete HS1 – With designed strength of M60
Floorkrete HS2 – With designed strength of M40
Floorkrete HS3 – With designed strength of M20
Wide range of Polymer / Co polymer modified/ Acrylic / SBR latex combination as single or two component underlayment waterproofing agents for application requiring in Flat Roof concrete, Kitchen Balconies, Chajjas , Slope roofs and wet areas like Bath-rooms, Canal linings, Swimming pools, Water tanks etc.
UltraTech Seal & Dry ILW+ is specially formulated Integral waterproofing liquid system which will improve the performance properties of plaster, mortar and concrete. It makes plaster, mortar and Concrete cohesive and enhances the yield, compressive strength and water tightness.
Features & Benefits
Improves work ability in reduced water cement ratio.
Compatible due to liquid form hence easy to mix no shrinkage
Produces dense homogenous concrete
UltraTech SEAL & DRY is a single component, cement based, polymer modified flexible, water proof coating incorporated with high quality polymer additives, graded sand and fillers for all positive side water proofing applications
UltraTech SEAL&DRY – FLEX is a two component, cement based, styrene acrylic polymer based flexible, water proof coating incorporated with high quality polymer additives, and fillers for all positive side water proofing applications of Terraces, Sloping Roofs RCC Water Tanks, Balcony, Domes. Highly recommended for waterproofing of areas less than 10,000 sq.ft. Elongation is more than 50% at tensile force of 50Kg/Sq.cm.
UltraTech SEAL & DRY – HIFLEX is a two component, cement based, acrylic emulsion polymer based elastomeric, water proof coating incorporated with high quality polymer additives, and fillers for all positive side water proofing applications of Terrace, Slope Roofs, Balcony, Domes, Swimming Pools, Sump Tanks, exterior walls. Highly suitable for demanding applications with area greater than 10,000sq.ft. Elongation is more than 100% at a tensile force of 50Kg/Sq.cm.
UltraTech Seal & Dry SBR is a styrene butadiene latex co-polymer, multipurpose bonding agent used for repairing of structures/concrete and waterproofing and bonding slurry. It reduces shrinkage cracks & improves abrasion resistance.
UltraTech Seal & Dry 5 PLUS is an Acrylic Polymer based multipurpose bonding agent. Seal & Dry 5 PLUS is recommended for crack filling and tile joint filling by mixing along with White cement. It can be used by mixing with water, directly as a priming/key coat over plastered surfaces and putty before painting to cover the minor surface shrinkage cracks.
UltraTech Seal & Dry 5 PLUS can also be used as an anti-corrosive protection coating over new and old reinforcements.
Features & Benefits
Easy and simple to use.
Provides excellent water impermeability.
Ensures good workability.
Provides good bonding and adhesion.
Provides toughness and flexibility.
Excellent material for repair and renovation.
Non Shrink non expandable high performance industrial grouts for wide varieties of application in Machine foundation, joining of Precast elements, High performance safety vaults etc.
It is recommended for grouting with design strength of 100 MPa for foundation base plates, machine foundations and beds which demand high early strength, as barrier material for strong rooms and vaults.
It is recommended for grouting with design strength of 80 MPa for foundation base plates, machine foundations and beds which demand high strength, for micro piles and pile caps, shear wall bond beams, for fixing and anchoring the precast elements, for manufacturing of high strength pavers and blocks.
It is recommended for grouting with design strength of 60 MPa for micro piles and pile caps, shear wall bond beams, for fixing and anchoring the precast elements, for manufacturing of high strength pavers and blocks, for fixing rails, anchors, fasteners etc.
Powergrout PGM is Pumpable Gun Grade Mortar. It can be used for filling of Tie rod holes/Slit holes in concrete with Mivan Shuttering Brick Masonary and also in Natural stones.
Polymer modified surface finishing plasters for thin and thick coat application for internal and external walls.
UltraTech READIPLAST is a ready mix cement plaster/ render with high quality polymer additives, well graded sand and fillers for manual plastering applications. It can be used for plastering on inner and outer walls. It can also be used effectively on brick, block, stone walls as well as concrete surfaces. Ideal for well-prepared walls with maximum thickness of plastering up to 15 mm.
UltraTech SUPER STUCCO is a ready mix cement based polymer enriched high performance surface finishing material incorporated with high quality polymer additives, graded sand and fillers for thin bed /coat applications.
Thin bed jointing material for AAC block, Fly Ash Bricks and Concrete Blocks.
UltraTech FIXOBLOCK is a versatile thin jointing material for thin bed applications of 3 mm. This mortar is specially designed to provide stronger, durable bonding between the blocks with optimum adhesive strength.
Autoclaved Aerated Concrete Block
Light weight block for masonry construction
UltraTech XTRALITE is a Light weight Autoclaved Aerated Concrete Block. It is manufactured through the reaction of the rising agent on a proportionate blend of lime, cement and flyash.